Thermocouple Converter

Canopus Instruments is one of the top manufacturers and suppliers of thermocouple, temperature converter. The thermocouple, temperature converter that Canopus manufactures are of top quality. Get in touch with us to know the details of the products.

Download PDF

SIM µ 2.0 Thermocouple TYPE K (TC-K) input type modules are designed to interface with the K type TC’s commonly used in temperature measurement applications. The output generated is an isolated 0-10V/4-20mA signal. These modules comprise of in-built Cold Junction Compensation (CJC) calibrated to track the K-type TC mV response at room temperature. The module can be calibrated to I/P v/s O/P range according to the user requirement.

The internal circuit compensation for K-type TC response results in limiting measurement error within +/-2% over temperature range of 0 – 10000°C.

Ordering Information

Isolation (I) Input Type
K Type Thermocouple (Voltage Output) I LTCV 2D XK10 – 3P
K Type Thermocouple (Current Output) I LTCI 2D XK42 – 3P
X: Actual T/C range

 

  • Note: e.g- I LTCV 2D XK10 – 3P
  • I – Isolation
  • LTC – Linearized Thermocouple I/P
  • V- Voltage O/P
  • 2D: Supply ( 24VDC)
  • XK-Actual T/C range
  • 10 – O/P range
  • 3P : 3 Port Isolation

Frequent Searches for Thermocouple Converter

Thermocouple Converter India, Thermocouple Transmitter Pune, Thermocouple to Voltage Converter New Delhi, Thermocouple to 4-20ma Converter Bangalore, Thermocouple Transmitter India, Thermocouple Transmitter Chennai, Thermocouple to Voltage Converter Mumbai, Thermocouple to 4-20ma Converter Kolkata, Thermocouple Converter Hyderabad, Thermocouple Transmitter Ahmedabad, Thermocouple to 4-20ma Converter Nashik

Download PDF

  • Input: K Type Thermocouple.
  • In-built Cold junction compensation (CJC).
  • Thermocouple Non-Linearity is compensated in the unit.
  • Accuracy better than +/- 2% over 0-+1000°C range.
  • Low Noise & Low drift for long term stability.
  • 24VDC Power Supply.
  • Slim & compact design.
  • Energy Efficient Module.

Applications

  • Heating Control Systems
  • Temperature monitoring systems
  • Data Acquisition Systems

Download PDF

Thermocouple Input Signal Input : TC Type K
Range : User Defined (0 to +1250°C)*
Factory Set
*-Max. Range Limits
Input Impedance 100K Ohm
Output Signal Output Options: 0- +10VDC, 4-20mADC. Factory Set
Load Resistance For Output Voltage >1 k Ohm
For Output Current < 500 Ohm
Performance
a. Electronic System
Accuracy ±0.2% of Span at 25°C
Linearity 0.1%
Temperature Drift <0.01% / °C
Response Time < 1Sec
Calibration Zero & Span (Trimpot )
b. K-Type TC Compensation TC non linearity compensation In built
Accuracy ±2% of Span at 25°C (0 to +1000°C)
±4% of Span at 25°C (0 to +1250°C)
c. Cold Junction Compensation In Built

 

Download PDF

Isolation 2KV – 3 Port.
Leakage Current <5mA
Power Supply Voltage 24VDC(nominal)
Operating Range 18 to 36 VDC
Ripple < 100mVpp
Termination Screw type terminal suitable for1.5mmsq.Wire.
Enclosure ABS Plastic, 35 mm DIN Rail Mounted. IP40 Protection class. Single Output W – 22.5mm
H – 75mm
D – 110mm
Power Supply Current
Operating temp. range 0 – 55°C
Storage temp. range 0 – 80°C
Relative Humidity 0 – 90%
RH Non-Condensing
Max. Altitude 3000 mts above MSL

 

Download PDF

Single input & Single output Converter

Pin Details Pin Details
1 NC 5 +Output
2 +Input 6 -Output
3 -Input 7 +24VDC
4 NC 8 GND

Download PDF

Additional information

Input Types

Thermocouple Sensor

Output Signal

Current 0-20/4-20mA (4 Wire), DC Voltage (+/-10V)

Enclosure

ABS Plastic

Product Type

Converter

Thermocouple Type

K type Thermocouple

Reviews

There are no reviews yet.

Be the first to review “Thermocouple Converter”

Your email address will not be published. Required fields are marked *

Translate »