Smart Sensor Signal Conditioner (Programmable Load Cell Amplifier)

Programmable load cell amplifier is an intelligent product designed to help the user by bringing ease of Onsite settings. The user has to feed appropriate parameter settings using Keypad and Display provided on the front panel. The S/W controlled self tuning feature of the product takes care of accurate calibration of the unit. Keypad controlled TARE and SPAN setting allows even an inexperienced user to tune the product on site.

Inputs from wide variety of Load-cells having response ranging from 0.5mV/V to 16mV/V are Field configurable. Response time is configurable to suit the application at hand. Analog output (0-10V/4-20mA) is provided. Control outputs (Relays 2 nos.) allow set point control feature. RS-485 MODBUS Communication interface enables remote configuration and data retrieval.

Ordering Information

LCAP Supply Output Interface
Relays Analog Output Communication
LCAP 24VDC :  D 1


0 – 10VDC: V

4-20mADC : mA

A :RS485

Note : e.g. Programmable Load Cell Amplifier, DC Supply, Two Relays, Voltage Output Modbus Communication. : LCAP – D2VA

Frequent Searches for Programmable Load Cell Amplifier

Load Cell Amplifier India, Load Cell Amplifier Ahmedabad, Strain Gauge Amplifier India, Strain Gauge Amplifiers Pune, Strain Gauge Amplifiers New Delhi, Load Cell Amplifier Bangalore, Strain Gauge Amplifiers Mumbai, Strain Gauge Amplifiers Chennai, Load Cell Amplifier Kolkata, Load Cell Amplifier Hyderabad

Download PDF

  • Wide range Strain Gauge Bridge type Load Cells can be interfaced.
  • Easy Onsite configuration using Keypad and Display (HMI)
  • Advanced 32 bit Micro-controller based design incorporates software algorithms for signal conditioning.
  • Isolated analog Output (0-10V/ 4-20mADC)
  • Response time Settings of 10 – 80mSec
  • Control Output Relays (2nos.)
  • RS485 MODBUS communication
  • Energy Efficient Design reduces carbon footprint.
  • Compact Sizes 75 X 70 mm


  • Tension Control
  • Torque Measurement
  • Speed Control.
  • Weighing Measurement

Download PDF


Load Cell Interface Loadcell Response Range : 0.5 mV/V to 16mV/V
Excitation Voltage : 10V, 150mA(max)
Configuration Field Configuration using Interactive Keypad. Remote TARE Configuration.
Display Range : ±999 (DP Configurable on-site)
Calibration  : Using  Scale Settings (Keypad)
Accuracy 0.2%  of FS
Response Time of Analog Output  10,20,30,40,50,60 & 80 mSec.(Settable with Keypad)
Analog  Output 0-10V or 4-20 mA   (Factory selectable) Isolation : 2KV
Relay Output(N) (Max 2) Solid State Relays ; Contact Rating : 230VAC, 100mA
Communication Isolated RS-485, Modbus Protocol

Download PDF

Enclosure DIN Rail Mount , ABS plastic
75 X 70 mm; Depth -110 mm
Operating temp. range 0 – 55°C
Storage temp. range 0 – 80°C
Relative Humidity 5 – 95% RH Non-Condensing
Max. Altitude 3000 mts above MSL


Download PDF

Additional information

Input Types

Load Cell / Strain Gauge Sensor

Output Signal

Current 0-20/4-20mA (4 Wire), DC Voltage (+/-10V)



Isolation Level

2 KV

Product Type



ABS Plastic


There are no reviews yet.

Be the first to review “Smart Sensor Signal Conditioner (Programmable Load Cell Amplifier)”

Your email address will not be published. Required fields are marked *

Translate »