Potentiometric / Resistance Converters

Now generate the excitation voltage required for powering the potentiometer device with the help of resistance to voltage converter. The potentiometer converter manufactured by Canopus Instruments are of the highest quality in the market. Get in touch with us to know the details of the products.

Download PDF

Potentiometer signals are typically generated in position control applications. The SIM µ 2.0 modules generate the excitation voltage required for powering the potentiometer device and measure the voltage variation at the wiper of the potentiometer. The isolated output 0-10V/4-20mA signal is provided to interface the Measuring system with the position feedback signal.

Ordering Information

Isolation (I) Input Type Output Type Supply I/P Signal Range O/P Signal Range Isolation No of O/P For Dual
I I/P O/P Supply X X 3P xx
I R

V

I

2D

0-1K:1 0-5V:05

0-10V:10

4-20mA:42

0-20mA:20

3P 121
0-5K:5
0-10K:10

Note: 12I extension implies Single Input & Dual Isolated output.

Frequent Searches for Potentiometric / Resistance Converters

Resistance Converter India, Potentiometer Converter Pune, Potentiometric Converters New Delhi, Potentiometric Resistance Converters Bangalore, Potentiometric Converters Mumbai, Potentiometric Resistance Converters Chennai, Resistance Converter Kolkata, Potentiometer Converter Hyderabad, Potentiometric Converters Ahmedabad, Potentiometric Resistance Converters Nashik

Download PDF

  • Input: Potentiometric.
  • Slim & compact design.
  • Energy Efficient Module.
  • Low Noise & Low drift for long term stability.
  • Response Time < 1 mSec.
  • 2kv 3 Port Isolation.
  • Duplex isolator version option.
  • Design Tested & Certified for compliance with CE Standards.

Applications

  • AC/DC Drive systems
  • PLC Systems
  • Data Acquisition Systems

Download PDF

 

Potentiometric Input Signal Input Options:0- 1KOhm, 0-5KOhm, 0-10KOhm. Factory Set
Input Impedance For Potentiometric 1M Ohm
Voltage Sourcing (Vs) Vs: 10VDC (10mA Max.)
DC Output Signal Output Options: 0-5VDC,0-10VDC,0-20mA,4-20mA. Factory Set
No of Outputs Two (Max)
Load Resistance For Output Voltage >1 k Ohm
For Output Current < 500 Ohm
Performance Accuracy ±0.2% of Span
Linearity 0.1%
Temperature Drift 0.01% / °C
Response Time < 1mSec
Calibration Zero & Span (Trimpot )

 

Download PDF

Isolation 2KV – 3 Port.
Power Supply Voltage 24VDC(nominal)
Operating Range 18 to 36 VDC
Ripple <  100mVpp
Enclosure ABS Plastic, 35 mm DIN Rail Mounted. IP40 Protection class. Single Output W – 22.5mm
H – 75mm
D – 110mm
Dual output W – 55mm
H – 75mm
D – 110mm
Operating temp. range 0 – 55°C
Storage temp. range 0 – 80°C
Relative Humidity 0 – 90%
RH Non-Condensing
Max. Altitude 3000 mts above MSL

 

Download PDF

Single input & Single output Converter

Potentiometric / Resistance Converters 24VDC Supply

Pin Details Pin Details
1 Vs 5 +Output
2 +Input 6 -Output
3 -Input 7 +24VDC
4 NC 8 GND
Single input & Dual output Converter

Potentiometric / Resistance Converters 24VDC Supply

Pin Details Pin Details
1 Vs 5 +Output
2 +Input 6 -Output
3 -Input 7 +24VDC
4 NC 8 GND
Pin Details Pin Details
1 Vs 11 GND
2 +Input 12 GND
3 -Input 13 +24VDC(Supply)
4 NC 14 +24VDC(Supply)
5 NC 15 NC
6 NC 16 – Output2
7 NC 17 +Output2
8 NC 18 NC
9 NC 19 – Output1
10 NC 20 + Output1

Download PDF

Additional information

Input Types

Potentiometer, Resistance

Output Signal

Current 0-20/4-20mA (4 Wire), DC Voltage (+/-10V)

Supply

24VDC

Isolation Level

2 KV

Enclosure

ABS Plastic

Product Type

Converter

Reviews

There are no reviews yet.

Be the first to review “Potentiometric / Resistance Converters”

Your email address will not be published. Required fields are marked *

Translate »