Potentiometric / Resistance Converters 90-270VAC Supply

Potentiometer signals are typically generated in position control applications. The SIM Mini 1.0 modules generate the excitation voltage required for powering the potentiometer device and measure the voltage variation at the wiper of the potentiometer. The isolated output 0-10V/4-20mA signal is provided to interface the Measuring system with the position feedback signal.

The SIM Mini 1.0 modules operate from 90-270Vac power supply.

Ordering Information

Isolation (I) Input Type Output Type Supply I/P Signal Range O/P Signal Range Isolation No of O/P For Dual
I I/P O/P Supply X X 3P xx



100-250VDC FU

0-1K:1 0-5V:05




3P 121

Note: 12I extension implies Single Input & Dual Isolated output.

Download PDF

  • Input: Potentiometer
  • Universal Power supply range 90-270VAC, 50Hz/60Hz or 100-250 VDC.
  • Energy Efficient Module.
  • Low Noise & Low drift for long term stability.
  • Response Time < 1mSec.
  • 2kv 3 Port Isolation.
  • Duplex isolator version option.
  • Design Tested & Certified for compliance with CE Standards.


  • AC/DC Drive systems
  • PLC Systems
  • Data Acquisition Systems

Download PDF


Potentiometric Input Signal Input Options:0- 1KOhm, 0-5KOhm, 0-10KOhm. Factory Set
Input Impedance For Potentiometric 1M Ohm
Voltage Sourcing (Vs) Vs: 10VDC (10mA Max.)
DC Output Signal Output Options: 0-5VDC,0-10VDC,0-20mA,4-20mA. Factory Set
No of Outputs Two (Max)
Load Resistance For Output Voltage >1 k Ohm
For Output Current < 500 Ohm
Performance Accuracy ±0.2% of Span
Linearity 0.1%
Temperature Drift 0.01% / °C
Response Time < 1mSec
Calibration Zero & Span (Trimpot )

Download PDF

Isolation 2KV – 3 Port.
Power Supply 90-270VAC, 50/60Hz or 100-250VDC.
Power Consumption 9VA Approx
Enclosure ABS Plastic, 35 mm DIN Rail Mounted. IP40 Protection class. Single Output W – 55mm
H – 75mm
D – 110mm
Dual output W – 100mm
H – 75mm
D – 110mm
Operating temp. range 0 – 55°C
Storage temp. range 0 – 80°C
Relative Humidity 0 – 90%
RH Non-Condensing
Max. Altitude 3000 mts above MSL


Download PDF

Single input & Single output Converter

Potentiometric / Resistance Converters 24VDC Supply

Pin Details Pin Details
1 Vs 11 NC
2 +Input 12 NC
3 -Input 13 NC
4 NC 14 NC
5 NC 15 NC
6 Phase 16 NC
7 NC 17 NC
8 Neutral 18 NC
9 NC 19 -Output
10 Earth 20 +Output
Single input & Dual output Converter

Potentiometric / Resistance Converters 24VDC Supply

Pin Details Pin Details
1 Vs 11 -Output2
2 +Input 12 NC
3 -Input 13 NC
4 +Output1 14 NC
5 -Output1 15 Phase
6 NC 16 NC
7 NC 17 Neutral
8 NC 18 NC
9 NC 19 Earth
10 +Output2 20-38 NC

Download PDF

Additional information

Input Types

Potentiometer, Resistance

Output Signal

Current 0-20/4-20mA (4 Wire), DC Voltage (+/-10V)



Isolation Level

2 KV


ABS Plastic

Product Type



There are no reviews yet.

Be the first to review “Potentiometric / Resistance Converters 90-270VAC Supply”

Your email address will not be published. Required fields are marked *

Translate »