Analog Voltage & Current Isolators

A huge variety of modules are available in the analog voltage & current isolators like v to i converter, i to v converter. So if you are looking for the highest quality of v to i converter or an i to v converter then then Canopus Instruments in the correct place to look for these products. Get in touch with us to know the details of the products.

Download PDF

SIM Mini1.0 modules comprise of a versatile range of signal conditioning & isolation modules. A variety of modules are available which input analog Voltage & Current signals from field. These modules Isolate and convert the signals in a suitable form to interface the output with the measuring systems without loss of accuracy. Alternately, these modules also help in providing isolated voltage & current outputs for field devices from the control system.

The SIM Mini 1.0 modules operate on 90-270VAC power supply.

Ordering Information

Isolation (I) Input Type Output Type Supply I/P Signal Range O/P Signal Range Isolation No of O/P For Dual
I I/P O/P Supply X X 3P XX
I V
I
V
I
90-270VAC
or
100-250VDC
FU
0-5V:05
0-10V:10
4-20mA:42
0-20mA:20
0-5V:05
0-10V:10
4-20mA:42
0-20mA:20
3P 12I

Note: 12I extension implies Single Input & Dual Isolated output.

Frequent Searches for Analog Voltage and Current Isolators

Voltage Converter India, Voltage Converter Bangalore, Voltage Converter Mumbai, Voltage Converter Hyderabad, Analog Voltage Isolator Pune, Analog Current Isolators India, Analog Current Isolators Chennai, Analog Current Isolators Kolkata, Analog Current Isolators Hyderabad, Analog Current Isolators Ahmedabad, Analog Current Isolators Nashik, Voltage Converter New Delhi
Download PDF

  • Input: DC V & mA
  • Output: 0-10V/4-20mA
  • Universal Power supply range 90-270VAC, 50Hz/60Hz or 100-250VDC
  • Energy Efficient Module
  • Low Noise & Low drift for long term stability
  • Response Time < 1mSec.
  • 2kV 3 Port Isolation
  • Dual Isolated Outputs
  • Design Tested & Certified for compliance with CE Standards

Note: Contact factory for other input signal ranges

Applications

  • AC/DC Drive systems
  • PLC Systems
  • Data Acquisition Systems

 

Download PDF

 

DC Input Signal Input Options: 0- +5V, 0- +10V, 0- ±5V, 0- ±10V, 0-5mA, 0-20mA, 4-20mA. Factory Set
Input Impedance For Current
For Voltage
100 Ohm
100 k Ohm
Output Signal Output Options: 0- +5V, 0- +10V, 0- ±5V, 0- ±10V, 1-5V, 0-20mA, 4-20mA. Factory Set
No of Outputs Two (Max)
Load Resistance For Output Voltage >1 k Ohm
For Output Current < 500 Ohm
Performance Accuracy ±0.2% of Span
Linearity 0.1%
Temperature Drift 0.01% / °C
Response Time < 1mSec
Calibration Zero & Span (Trimpot )

 

Download PDF

Isolation 2KV – 3 Port.
Power Supply 90-270VAC, 50/60Hz or 100-250VDC.
Power Consumption 9 VA Approx.
Enclosure ABS Plastic, 35 mm DIN Rail Mounted. IP40 Protection class. Single Output W – 55mm
H – 75mm
D – 110mm
Dual Output W – 100mm
H – 75mm
D – 110mm
Operating temp. range 0 – 55°C
Storage temp. range 0 – 80°C
Relative Humidity 0 – 90% RH Non-Condensing
Max. Altitude 3000 mts above MSL

 

Download PDF

Single input & Single output Converter

Analog Voltage & Current Isolators 24VDC Supply

Pin Details Pin Details
1 NC 11 NC
2 +Input 12 NC
3 -Input 13 NC
4 NC 14 NC
5 NC 15 NC
6 Phase 16 NC
7 NC 17 NC
8 Neutral 18 NC
9 NC 19 -Output
10 Earth 20 +Output
Single input & Dual output Converter

Analog Voltage & Current Isolators 24VDC Supply

Pin Details Pin Details
1 +Input 11 -Output2
2 -Input 12 NC
3 NC 13 NC
4 +Output1 14 NC
5 -Output1 15 Phase
6 NC 16 NC
7 NC 17 Neutral
8 NC 18 NC
9 NC 19 Earth
10 +Output2 20-38 NC

 

Download PDF

Additional information

Input Types

DC Current 0-20/4-20 mA, DC Voltage

Output Signal

Current 0-20/4-20mA (4 Wire), DC Voltage (+/-10V)

Supply

24VDC

Isolation Level

2 KV

Enclosure

ABS Plastic

Product Type

Isolator

Reviews

There are no reviews yet.

Be the first to review “Analog Voltage & Current Isolators”

Your email address will not be published. Required fields are marked *

Translate »