Analog Millivolt Signal Isolators 90-270VAC Supply

SIM Mini 1.0 modules are available which accept Analog miliVolt (mV) signals from field sensors, i.e. Current Shunts, Pressure sensors, etc. These modules Amplify the input signal and transmit suitable 0-10V/4-20mA output signal to the measuring systems without loss of accuracy. Isolation between I/P & O/P helps in elimination of measurement errors due to Ground Loops and also ensuring safety of measuring system.

The SIM Mini 1.0 modules operate from 90-270VAC power supply.

Ordering Information

Isolation (I) Input Type Output Type Supply I/P Signal Range O/P Signal Range Isolation No of O/P For Dual
I I/P O/P Supply X X 3P XX
I mV V
I
90-270VAC
or
100-250VDC
FU
0-50mV:50
0-75mV:75
0-100mV:100
0-5V:05
0-10V:10
4-20mA:42
0-20mA:20
3P 12I

Note: 12I extension implies Single Input & Dual Isolated output.

 

Download PDF

  • Input : Millivolt Signals
  • Differential Input stage improves Common Mode Noise Rejection
  • Universal Power supply range 90-270VAC, 50Hz/60Hz or 100-250VDC.
  • Low Noise & Low drift for long term stability.
  • Response Time < 100mSec.
  • 2kv 3 Port Isolation.
  • Dual Isolated Outputs
  • Design Tested & Certified for compliance with CE Standards.

Note: Contact factory for other input ranges.

Applications

  • AC/DC Drive systems
  • PLC Systems
  • Data Acquisition Systems

 

Download PDF

DC(mV) Input Signal Input Options: 0-50mVDC,0- 75mVDC, 0-100mVDC. Factory Set
Input Impedance For mV input 1M Ohm
Output Signal Output Options: 0- +5V, 0- +10V, 0- ±5V, 0- ±10V, 1-5V,0-20mA, 4-20mA. Factory Set
No of Outputs Two (Max)
Load Resistance For Output Voltage >1 k Ohm
For Output Current < 500 Ohm
Performance Accuracy ±0.2% of Span
Linearity 0.1%
Temperature Drift 0.01% / °C
Response Time < 100mSec
Calibration Zero & Span (Trimpot )

 

Download PDF

Isolation 2KV – 3 Port.
Power Supply 90-270VAC, 50/60Hz or 100-250VDC.
Power Consumption 9 VA Approx.
Enclosure ABS Plastic, 35 mm DIN Rail Mounted. IP40 Protection class. Single Output W – 55mm
H – 75mm
D – 110mm
Dual Output W – 100mm
H – 75mm
D – 110mm
Operating temp. range 0 – 55°C
Storage temp. range 0 – 80°C
Relative Humidity 0 – 90% RH Non-Condensing
Max. Altitude 3000 mts above MSL

 

Download PDF

Single input & Single output Converter

analog-millivolt-signal-isolator--90-270vac-supply

Pin Details Pin Details
1 NC 11 NC
2 +Input 12 NC
3 -Input 13 NC
4 NC 14 NC
5 NC 15 NC
6 Phase 16 NC
7 NC 17 NC
8 Neutral 18 NC
9 NC 19 -Output
10 Earth 20 +Output

Single input & Dual output Converter

analog-millivolt-signal-isolator-90-270vac-supply

Pin Details Pin Details
1 +Input 11 -Output2
2 -Input 12 NC
3 NC 13 NC
4 +Output1 14 NC
5 -Output1 15 Phase
6 NC 16 NC
7 NC 17 Neutral
8 NC 18 NC
9 NC 19 Earth
10 +Output2 20-38 NC

 

Download PDF

Additional information

Input Types

DC mV

Output Signal

Current 0-20/4-20mA (4 Wire), DC Voltage (+/-10V)

Supply

90-270VAC/100-270VDC

Isolation Level

2 KV

Enclosure

ABS Plastic

Product Type

Isolator

Reviews

There are no reviews yet.

Be the first to review “Analog Millivolt Signal Isolators 90-270VAC Supply”

Your email address will not be published. Required fields are marked *

Translate »